采卤对接井施工工艺的工程实践          下载免费PDF全文

谷惠东 《探矿工程》2021,48(S1):154-159

以江西九二盐业403-404采卤对接井组的施工工程为案例,系统介绍了井区地质情况、钻探施工情况;总结了大口径取心工具的优点,螺杆定向钻进施工工艺及攻克技术难点。  相似文献   

井筒电加热改善水平井蒸汽吞吐效果机理实验     

吴永彬  吕柏林  杜宣  卢迎波  蒋有伟  邢向荣 《现代地质》2021,35(4):1136-1146

针对稠油水平井蒸汽吞吐面临入井渗流阻力大、产量水平低、吞吐递减率高、采收率偏低等问题,提出了电加热辅助水平井蒸汽吞吐方法。首先根据水平井蒸汽吞吐过程中的电加热与蒸汽复合传热特征,建立了电加热辅助蒸汽吞吐三个阶段的(注汽阶段、焖井阶段、生产阶段)储层升温解析模型,在此基础上,设计并开展了电加热辅助蒸汽吞吐和常规水平井吞吐的宏观比例物理模拟对比实验,通过实验验证了解析公式,揭示电加热改善水平井吞吐效果关键机理,并利用实际典型井模型进行了潜力预测。结果表明:电加热协同蒸汽吞吐,具有注蒸汽阶段实现水平段均匀加热升温、焖井阶段持续热补偿加热近井地带、生产阶段降低原油入井渗流阻力并提高吞吐产量的关键机理。典型井组预测电加热辅助水平井吞吐可提高吞吐采收率9.4%,油汽比从0.14提高到0.23,在水平井蒸汽吞吐油藏具有重要应用潜力。  相似文献   

页岩气水平井TOC测井评价新方法     

刘伟男  张超谟  朱林奇  胡松  孔政  邓瑞 《物探与化探》2021,(2):423-431

由于存在地层缺失、井眼穿层不断变化、重点层段测井曲线较少、井眼环境复杂、测井响应值与储层参数关系较为复杂等特点,页岩气储层水平井测井解释难度较大。针对该问题,本文采用“水平井钻遇地层模型—水平井间及水平井与直井响应差异分析—水平井曲线校正—基于直井的参数评价模型”的评价技术流程,进行页岩气水平井TOC测井评价。在测井评价中,针对响应规律复杂的特点,采用直方图法进行测井响应规律分析,同时考虑到水平井测井曲线较少,为了综合利用测井曲线信息,结合曲线重叠方法提出双重信息融合评价模型。结果表明,本方法在充分分析测井响应差异的基础上对水平井测井曲线进行校正,且提出的双重信息融合模型具有能充分利用测井信息、评价精度高以及操作简单等优点。  相似文献   

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples     

Wei‐Xin Lv  Hao‐Ming Yin  Meng‐Shu Liu  Fang Huang  Hui‐Min Yu 《Geostandards and Geoanalytical Research》2021,45(1):245-256

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.  相似文献   

河北平原廊固凹陷ACX03孔晚上新世以来地层与沉积^*          下载免费PDF全文

李瑞杰  王强  赵勇  魏波  孙永华 《古地理学报》2021,23(3):539-554

基于河北平原廊固凹陷东北部ACX03孔(深300.0 m)浅部¹⁴C年龄和磁性地层,建立钻孔第四纪地层格架,依据ACX03孔岩心沉积物、测井曲线和微体古生物特征划分沉积层段并分析沉积环境。研究结果表明: ACX03孔B/M(布容/松山)、M/G(松山/高斯)极性界线分别位于83.8 m、220.2 m,孔底年龄约3.2 Ma,划分13个沉积层段。上新统(220.2~300.0 m)为河道、河漫滩夹湖泊沉积,下更新统(85.2~220.2 m)为河道、湖泊、河漫滩沉积,中更新统(61.5~85.2 m)为分支河道夹河漫滩及河间洼地—湖沼沉积,上更新统(23.2~61.5 m)为河漫滩、分支河道沉积,全新统(0~23.2 m)为泛滥平原、河曲—牛轭湖沉积。对比ACX03孔与邻近钻孔第四纪地层认为,河北平原廊坊—固安一带早更新世差异性沉降最强,之后一直到全新世越来越弱。  相似文献   

基于标准差分析法的X波段双偏振天气雷达资料质量评估     

李思腾  仰美霖  李林  张舒婷  张治国  潘昱冰 《干旱气象》2019,37(3):467-476

2015年9月,北京市气象局在北京地区架设4部X波段双线偏振天气雷达并开展了观测试验。本文利用其中3部雷达在2016年6月30日的观测数据,用标准差分布统计方法,对雷达的观测参量进行初步质量评估。结果表明:(1)3部雷达反射率标准差符合理论值的数据占总观测数据的73.5%~77.9%,反射率的数据波动基本符合理论分布;(2)3部雷达差分反射率标准差符合理论值的数据占总观测数据的68.4%~81.4%,其中房山雷达数据波动较大;(3)3部雷达互相关系数标准差符合理论值的数据占总观测数据的45.7%~63.5%,其中房山雷达数据波动最大,其他2部雷达都有同程度的数据波动;(4)3部雷达差分传播相位标准差符合理论值的数据占总观测数据的73.5%~83.9%,其中房山雷达数据波动相对较大,与雷达其他观测参量相比,差分传播相位的波动较小。  相似文献   

基于镜像图的LRC和CRC偏差结合的人脸识别     

陈铭  周先春  周杰 《南京气象学院学报》2019,11(3):340-345

为了提高人脸识别率及更好地显示人脸特征,本文提出了一种基于镜像图的LRC和CRC偏差结合的人脸识别方法.该方法首先生成一种镜像人脸,再通过融合原始人脸和镜像人脸形成新的混合训练样本,最后利用LRC和CRC偏差结合进行人脸识别.新方法增加了训练样本的数目,克服了由于光照和姿态等外部因素带来的影响.实验结果表明,镜像图与LRC和CRC偏差结合的人脸识别方法提高了人脸识别的准确性.  相似文献   

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system     

Kuang‐Yi Li  Shaw‐Yang Yang  Hund‐Der Yeh 《水文研究》2010,24(25):3676-3688

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir     

Bin Xu  Ron C.K. Wong 《国际地质力学数值与分析法杂志》2013,37(18):3131-3149

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

河嘉203H含硫水平气井测试工艺实践     

唐波  乔智国  陈伟  叶翠莲 《海洋地质译丛》2010,(4):103-105

河嘉203H井是川东北河坝构造嘉二高压含硫气藏部署的第一口水平井,具有埋藏深、储层压力高、腐蚀分压高、地层易漏失、水平井压井堵漏难度大的特点,通过开展工具优选、管柱结构优化设计、流程优选,并对替浆、放喷油嘴控制及压井等主要工序的施工工艺参数进行研究,形成了河坝嘉二含硫气藏水平井测试工艺技术体系,并在河嘉203H井获得成功应用。  相似文献